NVIDIA’s Full-Fat GA102 GPU Powered GeForce RTX 4090 Ti Graphics Card Pictured, Massive Triple-Fan Cooler For 600W+ Powerhouse
The card pictured is alleged to feature NVIDIA’s full-fat AD102 GPU based on the Ada Lovelace chip architecture. The full-fat chip is presumably going to feature a TBP of 600W (+) and as such, it will require some beefy cooling solutions such as the one pictured here. As per the leaker, this seems to be an early engineering sample that is used to test the full limit of the monstrous AD102 GPU which will land in the consumer segment in a couple of months. The final variant for the Founders Edition design is expected to use a vastly different cooler but this seems to confirm that AD102 is going to be one hard chip for AIBs to cool down.
— Greymon55 (@greymon55) September 5, 2022 This isn’t the first time that we have heard of a triple-fan cooler for the reference AD102 board. A while back, Kopite7kimi had pointed out the same that a triple-fan and a 3-slot cooler were made purely for AD102 GPUs and this leak seems to be a confirmation of that.
— kopite7kimi (@kopite7kimi) June 9, 2022 As for the card itself, it appears to be very thick, both in terms of sheer size and width. The triple-fan solution is based on an axial-blade design and there’s a large heatsink underneath the shroud. The shroud itself is very simple with a matte black texture and it looks like the card comes with a 3-slot form factor. NVIDIA has been relying on a 16-pin connector so if this is indeed a 600W variant, then a single Gen5 connector should be enough to boot it up unless the ES design has two of those connectors. NVIDIA GeForce RTX 4090 Ti ‘Expected’ Specifications The NVIDIA GeForce RTX 4090 Ti is going to be the full-fat configuration with all of the 144 SMs enabled for a total of 18432 CUDA cores. The GPU will come packed with 96 MB of L2 cache and a total of 384 ROPs which is simply insane. The clock speeds are not confirmed yet but considering that the TSMC 4N process is being used, we are expecting clocks between the 2.0-3.0 GHz range. As for memory specs, the GeForce RTX 4090 Ti is expected to rock 24 GB GDDR6X capacities that might come at faster 24 Gbps speeds across a 384-bit bus interface. This will provide up to 1.152 TB/s of bandwidth. Now all these boosted specifications will result in higher power draw too and the flagship is expected to operate at a TBP of around 600W. Now for 600W, a single 16-pin Gen 5 connector should be enough but most of the custom variants will definitely end up utilizing dual Gen 5 connectors since AIBs don’t necessarily stay within spec and even the slightest of factory overclocks will push the TBP above 600W which is the limit of a single Gen 5 power connector. We have also seen an alleged NVIDIA GeForce RTX 4090 Ti heatsink and cooler shroud which hints at the use of a beefier cold plate that provides coverage for both the GPU and memory dies along with an overall larger structure. The previously leaked cooler seems more reminiscent of a final FE or Founders Edition design than the new leak which is more of an in-house testing design & judging by how big it looks, the AIB models will end up being vastly bigger and we may even end up with quad-slot designs from all partners.